Conductive Waveguide Gaskets in WR & M83528/013 Sizes

conductive waveguide gaskets

Conductive waveguide gaskets provide EMI/RFI shielding, environmental sealing, and electrical grounding across waveguide flanges – machined metal interfaces that support fastening, electrical contact, and aperture alignment in waveguides. SSP fabricates conductive waveguide gaskets from the EMI/RFI elastomers that we make and offers gaskets in WR sizes and M83528/013 slash sizes. 

Why buy EMI waveguide gaskets from SSP instead of the competition? For starters, SSP offers low minimum order quantities (MOQs) and rapid turnaround times. Plus, you can buy from us directly. In addition, many of our materials are available in continuous rolls for fast, efficient fabrication at higher volumes. From prototyping through production, SSP is ready to support your project.

MIL-DTL-83528 Waveguide Gasket Materials

SSP makes electrically conductive silicones and fluorosilicones that are part of the M83528 Qualified Product List (QPL) from the U.S. Defense Logistics Agency (DLA). These materials meet the lettered requirements of the MIL-DTL-83528 specification for elastomeric shielding gaskets and are Made in USA under our ISO 9001:2015 quality system. 

Often, conductive waveguide gaskets for military applications are made from MIL-DTL-83528 Type K materials – silicones that are filled with silver-plated copper particles and have a minimum shielding effectiveness of 110 dB at 10 GHz. Because MIL-DTL-83528 Type K specifies a hardness or durometer of 85 Shore A, these elastomers resist extrusion and cold flow under high bolt compression.

SSP2571-85 is a Type K material that provides an alternative, or offset, to both CHO-SEAL 1211 and Nolato Jabar 806-K. If you need an EMI waveguide gasket that meets a different lettered section of the MIL-DTL-83528 spec, choose these SSP materials instead:


Like SSP2571-85, these elastomers are offsets to both CHO-SEAL and Nolato Jabar products.

WR Sizes and M83528/013 Slash Sizes

SSP fabricates EMI gaskets for waveguide sizes (WR) defined by the Electronic Industries Alliance (EIA). WR sizes correspond to M83528 slash sizes – individual part specifications within the larger MIL-DTL-83528 standard. They’re called “slash sizes” because the part numbers include a slash (/) between an M83528 prefix and an alphanumeric string that describes the individual part number.

The table below shows the waveguide sizes and flanges that SSP supports, and how WR sizes correspond to common MIL-DTL-83528 slash sizes.

Waveguide SizeFrequency Range (GHz)Flange Style / TypeCommon MIL-DTL-83528 Slash Specs
WR-28 to WR-4218.0 – 40.0 GHzMillimeter Wave / Ka-Band FlangesM83528/013 (Custom Die-Cut)
WR-62 to WR-908.2 – 18.0 GHzKu-Band / X-Band Radar FlangesM83528/013-001 to -010
WR-112 to WR-1873.95 – 10.0 GHzC-Band / X-Band SATCOM FlangesM83528/013-011 to -020
WR-284 to WR-6501.12 – 3.95 GHzS-Band / L-Band High-Power RadarM83528/013 Large Format

M83528/013 waveguide gaskets can be cut or molded and circular, square, or rectangular.

  • Configuration A – Die Cut Square and Rectangular
  • Configuration B – Die Cut Circular
  • Configuration C – Molded Rectangular with O Cross Section
  • Configuration D – Molded Circular with O Cross Section
  • Configuration E – Molded Circular with E Cross Section

SSP fabricates EMI waveguide gaskets for each of these configurations and lists available slash sizes and dimensions on the M83528/013 Waveguide Gaskets page of our website. Whether you need cut or molded parts, we have an in-house machine shop where we make our own dies and compression molds. For prototypes or low volumes of cut parts, we offer flash cutting services.

Ask SSP for Conductive Waveguide Gaskets

As a vertically integrated company, SSP is both a materials manufacturer and a gasket fabricator. Along with our machine shop, we have an in-house laboratory and can provide you with a full Certificate of Analysis (COA) for each batch of material. To request a quote or to learn more about our capabilities, contact SSP.

Recent Posts